Quality Used Pallet Racking, In Stock
Huge availability of used Redirack pallet racking across our Ontario network. We supply, install and certify — anywhere in the province.
- Large network inventory
- Supply + install + certify
- Ontario-wide
- Cost-effective
Used Redirack Pallet Racking — installed & certified
Our network is stocked with high-quality used Redirack pallet racking right now, ready to ship across Ontario and beyond. Buying used Redirack is one of the fastest, most cost-effective ways to add reliable warehouse storage — typically at a fraction of the price of new racking, with the same load capacity and durability the Redirack name is known for.
We handle the entire process from start to finish. After matching available stock to your warehouse layout and storage requirements, we arrange shipping and provide professional installation at your facility. Once installed, we certify the completed system so it meets safety standards and you're up and running with confidence. Whether you're expanding an existing setup or outfitting a new space, our team makes sure every beam, frame, and upright is sound, properly configured, and ready for the loads you need to store.
Tell us your requirements — your footprint, beam levels, and load weights — and we'll match available used Redirack inventory to your layout.
Used components in stock
Inventory moves fast — contact us for current availability and sizes.
Load Beams
96?, 108?, 120? & 144? load beams in various capacities to suit your pallet weights.
Get pricing ?Wire Mesh Decks
36? & 42? deep x 46?, 52? & 58? wide, in 2,000 lb & 2,500 lb capacities.
Get pricing ?Safety Accessories
Load supports, row connectors, end-aisle guards and post protectors to complete and protect your system.
Get pricing ?Not sure what fits?
Tell us your application, dimensions and load needs — we'll spec the right solution, free.
Talk to an expert ?Used racking sizing reference
Typical sizes in our network. Availability changes — confirm current stock with our team.
End Frames
- Depths: 36? & 42?
- Heights: 96?, 144?, 192?, 216?, 240?+
- Roll-formed and structural
Beams & Decks
- Beams: 96?, 108?, 120?, 144?
- Mesh decks: 2,000 & 2,500 lb capacity
- Various beam capacities available
What to look at before you buy used racking
Used racking is a good buy when you know what you are getting. These are the things that decide whether a component goes back into service or goes to the scrap bin.
What gets checked
- Columns sighted for straightness and twist, front to back and side to side
- Base plates flat, undeformed, with anchor holes that are still round
- Welds at the base and at every brace intact, with no cracking
- Beam end connectors square, with no elongated pins or missing safety clips
- Surface rust versus pitting — one is cosmetic, the other is not
What does not go back in
- Bent or previously straightened columns — steel that has yielded once is not the same steel
- Cracked welds or field-welded repairs of unknown origin
- Damaged connectors, since the connection is where the load actually transfers
- Components with no traceable capacity
Matching what you already own
- Connector styles differ by manufacturer — beams from one brand do not reliably seat in another brand's frame
- Within a bay, keep frames and beams to one system
- Measure your existing frames and beam step before you order, or send us photos of the connector
- Tell us if you are extending a Redirack pallet racking run and we will match the profile
Capacity, in writing
- Beam capacity changes with length and profile — a longer beam of the same section carries less
- Frame capacity depends on height, beam spacing and depth
- We identify what you are buying and give you ratings for the configuration you are building
- Load signage should reflect the rack as built, not the catalogue
Used or new?
Most warehouses end up with both. The question is which one belongs in which part of the building.
Used usually wins when
- You are extending a system you already own and the profile still exists
- The sizes are standard and the loads are well inside the ratings
- Budget is the constraint and the storage is not the bottleneck in your operation
- You need bulk storage, seasonal overflow or a staging area rather than a precision pick face
New usually wins when
- You need matched components across a large install, delivered as one system
- Heights, spans or loads fall outside standard configurations
- Full engineering documentation matters — for example ahead of a Pre-Start Health and Safety Review
- The rack is going somewhere it will take daily lift-truck contact and you want the newest steel there
We quote both, and we will tell you when used is the wrong call — send us the layout.
Where used racking comes from
Reconditioned racking comes out of real buildings — facilities that are closing, relocating, or reconfiguring around a new process.
Clearing a facility?
- We quote teardown and removal as its own scope of work
- Racking worth reconditioning can come off the disposal side of your budget
- Send bay dimensions, beam lengths, frame heights and a rough count to get a number
- Photos of the frame connector tell us more than a spec sheet does
Buying from stock
- Inventory turns, so availability is quoted against what is on the floor that week
- Tell us the pallet size, the load weight and the ceiling height rather than a part number
- Mixed loads are normal — used frames with new beams, or the reverse
- Wire mesh decks, row spacers, column guards and end-of-aisle protection are quoted with the rack, not after it
Used pallet racking FAQ
Common questions from Ontario warehouse and facility managers.
Is used racking safe?
Can you certify the racking?
Do you ship across Ontario?
How do I find out what's in stock?
Is used pallet racking safe?
Can I mix used and new components?
Do you supply load capacities for used racking?
Will used racking pass a Pre-Start Health and Safety Review?
Do you install what you sell?
Related pages: new pallet racking · Redirack systems · installation · Toronto · Mississauga · Brampton · Hamilton · Burlington