Engineered vertical net barriers that keep bulk and stacked product from falling into walkways and workstations. Each system is sized to the load, the height and the space it protects — supplied and installed across Toronto, the GTA and Ontario.
Wherever bulk items or stacked product sit next to a walkway or a workstation, there’s a fall risk — and a person on the other side of it. A vertical barrier net system is the safety layer in between. It stands as an engineered wall of netting that stops product from toppling into the space where people work. Because no two areas are the same, each system is designed around the weight of the product, the height that needs protecting and the space around it — then built with the right net strength, column sizes and bracing to hold it.
Net strength, columns and bracing are specified together — so the finished barrier matches the load and the space it protects.
The netting is rated to the weight of the product behind it — from lighter bulk items to heavy stacked loads — so the barrier actually holds what it’s meant to stop.
We can hang the barrier off your existing building columns, supply engineered (ENG) columns, or combine the two — whatever suits the layout and keeps the system rigid.
Column sizes and bracing are matched to the load and span so the barrier stays put under an impact — not a token frame that flexes when it’s tested for real.
The barrier is built to the height your product actually reaches — low guarding for a stacked pallet run, or full-height netting where product is piled or stored high.
Ideal along walkways, aisles and workstations that run beside stacked product — a clear, engineered line between where product is stored and where people move and work.
Send a photo of the area and what’s stored there — we’ll spec the net, columns and height to wall it off safely.
Discuss Your AreaEvery barrier is engineered to the site — the elements below are specified together for your load, height and layout.
A barrier net only does its job if it’s built for what’s behind it — that’s the difference between a designed system and a length of mesh.
It stops bulk and stacked product from falling into the walkway or workstation on the other side — protecting the people who work next to your storage every shift.
Net strength, column size and bracing are chosen for the actual weight and height of your product — so the barrier holds when something leans, shifts or falls against it.
Existing columns, supplied ENG columns or a mix — the system works with the structure you already have and the space you can give it, without wasting floor.
From an exposed area to an engineered barrier — we handle the design, supply and install.
Send photos of the walkway or workstation, what’s stored beside it, and roughly how high it stacks.
Net strength, column sizes, bracing and height are designed for your load and space — with a quote for the exact system.
Netting and columns are fabricated to the design, using your existing columns or supplied ENG columns as needed.
Our crews set the columns, brace the frame and hang the barrier — the walkway is protected when we leave.
Rack netting attaches to your pallet racking to catch product falling out of the rack. A barrier net system is a free-standing vertical wall of netting on its own columns — used to separate walkways and workstations from bulk or stacked product that isn’t necessarily in racking. Many sites use both.
It’s engineered to your application — we look at the weight of the product, the height being protected and the surrounding area, then specify the net strength, column sizes and bracing to match. The heavier or higher the load, the more the whole system is built up to hold it.
Either. We can utilize your existing building columns, supply engineered (ENG) columns where there’s nothing to tie into, or use a combination of both — whatever gives the barrier a rigid, properly braced structure for your layout.
As high as your product needs it to. The height is set to where bulk or stacked product actually reaches — a lower run where loads are modest, or full-height netting where product is piled or stored high next to people.
Anywhere stacked or bulk product sits next to a walkway, aisle or workstation and could fall onto someone — along traffic routes, around bulk storage zones, and between storage areas and the people working beside them.
Both. We engineer and supply the system and our crews install it — setting the columns, bracing the frame and hanging the netting. If you also store on pallet racking, ask about pairing it with rack netting for back-of-rack protection.
Tell us about the area and what’s stored there — we’ll quote an engineered barrier net system, installed anywhere in Ontario.
Request a Quote