- Canadian Supplier of Pallet Racking, Industrial Storage & Material Handling Equipment
Pallet Racking in Brampton
High-density racking for Brampton distribution centres — supplied, engineered and installed along the 407, 410 and Airport Road corridors.
Brampton is a throughput problem, not a storage problem
Brampton grew into one of the busiest distribution nodes in the country, and the buildings show it. Modern clear heights, deep bays, dock doors by the dozen, and tenants moving food, consumer goods and auto parts through in volume. The constraint in most Brampton buildings is not whether the pallets fit — it is how many touches it takes to get one out the door during a peak week.
That changes what the right racking is. Selective racking gives you a pick face at every position and burns floor space on aisles. Drive-in, push-back and pallet flow trade some selectivity for density and can lift storage significantly in the same footprint, provided your SKU profile suits them. The honest answer depends on how many pallets per SKU you hold and how fast they turn, which is the first thing we ask about.
What we supply across Brampton
From a dozen bays of overflow to a full distribution centre layout.
Redirack pallet racking
Selective racking as the baseline, new or reconditioned — see pallet racking and used pallet racking.
High-density configurations
Drive-in, push-back, double-deep and pallet flow where the SKU profile and clear height justify the trade in selectivity.
Protection that pays for itself
Column guards, end-of-aisle protection, rack netting and barrier nets — cheaper than the downtime from a hit upright.
Everything around the rack
Mezzanines, secure caging, picking carts and wide span storage systems for the small-parts side of the building.
What we look at in a Brampton building
Density only helps if the trucks and the people can still move.
Throughput
- Pallets per SKU and turn rate — the numbers that decide selective versus deep-lane storage
- Peak-season volumes, not annual averages, because peak is what breaks a layout
- Dock door count and staging depth in front of the racking
- Whether picking happens at floor level, from the rack, or on a mezzanine
The building
- Clear height and the lowest sprinkler obstruction across each bay run
- Column grid and how it lines up with the aisle plan you actually want
- Floor flatness and slab capacity, which govern anchoring and rack height
- In-rack sprinkler requirements, which change with deep-lane configurations and are worth settling early
How a Brampton project runs
Site visit and numbers
We measure the building and ask for the SKU and volume picture — both drive the layout.
Layout options
Usually two or three, with the storage positions and aisle counts side by side — see design and CAD layout.
Compliance
Load signage, anchor detail and support for a Pre-Start Health and Safety Review where one applies.
Install and maintain
Installation around your operating hours, then inspection and repairs.
Brampton pallet racking FAQ
Can you increase storage without moving buildings?
Usually, yes. Deeper configurations, better use of clear height and a re-cut aisle plan often add meaningful positions in the same four walls. It starts with a measure and your SKU profile.
Do you install outside operating hours?
Yes. Distribution buildings rarely have a quiet day, so evening, overnight and weekend installs are normal for us.
What about damaged uprights?
They get replaced, not straightened. Repaired steel is not rated steel — see rack inspection and repairs.
Do I need a PSR in Brampton?
Ontario requires a Pre-Start Health and Safety Review in defined circumstances and racking is a common trigger question. See our PSR page.
Also serving
Nearby
Across Southern Ontario
- Oakville, Milton and Halton Region
- Kitchener-Waterloo, Cambridge and Guelph
- London and Woodstock
- Windsor and the 401 corridor
More pallets in the same building
Tell us what you store and how fast it moves. We will come out, measure, and show you the layouts worth comparing.
Request a QuoteRelated pages: pallet racking systems · used pallet racking · installation · inspection and repairs · Toronto · Mississauga · Hamilton · Burlington